The 2011 Cadillac SRX is a great car, but there are a few things that can make it better. One of those things is the backup camera. Unfortunately, the backup camera on the 2011 SRX is often blurry. This can be frustrating, especially when you’re trying to park in a tight spot.
There are a few things that you can do to try to fix this problem. First, make sure that the camera lens is clean. If there’s any dirt or debris on the lens, it can cause the camera to produce a blurry image. You can clean the lens with a soft, dry cloth.
If the lens is clean and the image is still blurry, there are a few other things that you can try. One is to adjust the focus of the camera. This can be done by accessing the menu on the infotainment system and selecting the “Camera” option. From there, you can use the arrow keys to adjust the focus.
Another thing that you can try is to adjust the angle of the camera. This can also be done from the “Camera” menu on the infotainment system. Use the arrow keys to tilt the camera up or down until the image is clear.
If you’ve tried all of these things and the image is still blurry, there’s a good chance that the camera itself is defective. In this case, you’ll need to take the car to a dealer or a qualified repair shop to have the camera replaced.
Also read: 2004 Cadillac DeVille Transmission Fluid Change
Price of 2011 Cadillac SRX Rear View Camera Aftermarket
The price of an aftermarket rear view camera for a 2011 Cadillac SRX will vary depending on the make and model of the camera, as well as the retailer that you purchase it from. However, you can expect to pay anywhere from $100 to $300 for a quality aftermarket rear view camera.
2011 Cadillac SRX Backup Camera Step by Step Replacement Guide
Here’s a quick and easy guide to replacing your backup camera.
1. Order a replacement backup camera. Make sure to get one that’s compatible with your SRX model.
2. Unscrew the old camera from its mounting location.
3. Screw the new camera into place.
4. Connect the new camera to the backup camera wiring harness.
5. Test the new camera to make sure it’s working properly.
That’s all there is to it! Replacing your backup camera is a quick and easy job that anyone can do.
Fuse Location of Cadillac Backup Camera
If your Cadillac SRX is equipped with a backup camera, there is a fuse located in the rear of the vehicle. The backup camera fuse is located in the Underhood Fuse Block on the driver’s side of the vehicle. If the fuse is blown, the backup camera will not work.
Why Cadillac SRX 2011 Backup Camera Not Working
There are a few things that could be causing your backup camera to not work. The first thing you should check is the fuse. If the fuse is blown, then the camera will not receive power and will not work. The next thing you should check is the wiring. If the wires are loose, damaged, or not connected properly, then the camera will not receive power and will not work. Finally, you should check the camera itself for any damage. If the camera is cracked, damaged, or not working properly, then it will need to be replaced.
Reason of Backup Camera Black Screen
If you notice that the backup camera display is occasionally black, there are a few things that can cause the backup camera display to go black, and fortunately, there are a few things you can do to fix the problem.
One of the most common reasons for a black backup camera display is a dirty camera lens. If the lens is covered in dirt, dust, or even fingerprints, it can cause the image to appear black. To clean the lens, simply wipe it down with a soft, dry cloth. If the lens is particularly dirty, you may need to use a lens cleaner and a lint-free cloth.
Another common reason for a black backup camera display is a faulty connection. If the connection between the camera and the display is loose or damaged, it can cause the image to go black. To fix a loose connection, simply tighten the connection or replace the cable. If the connection is damaged, you may need to replace the entire camera.
If you’ve tried cleaning the lens and tightening the connection, but the backup camera display is still black, there may be an issue with the display itself. In some cases, the display may need to be replaced. However, if the display is still under warranty, you may be able to get it replaced for free.
If you’re dealing with a black backup camera display, don’t despair. With a little troubleshooting, you should be able to identify the problem and fix it quickly.